ASTEK EM-12

ASPHALT EMULSION METAL DUCTAL PIPE COAT

This information is to assist customers in determining if this product is suitable for the proposed application, and to satisfy themselves as to suitability of the contents. Nothing herein shall constitute a warranty, expressed or implied, including any warranty of merchantability or fitness, nor is protection from law or patent implied.

PRODUCT DESCRİPTİON

Clippership EM-12 Pipe Coat is a single component non-flammable highly rubberized asphalt emulsion modified with polymers and plasticizers. More

BASIC USES

More

LIMITATIONS

DO NOT ALLOW material to freeze. DO NOT THIN material. More

APPLICATION

Clippership EM-12 Pipe Coat must be applied to a surface that is free from all foreign matter. This material should remain dry until it has cured. This material should be mixed before using and yields a coverage of 250-350 square feet per gallon. More

STORAGE

Clippership EM-12 Pipe Coat must be kept from freezing. More

MATERIAL SPECIFICATIONS

Weight per Gallon @ 770F, ASTM-D-1010, (lbs) 8.5-8.7
Nonvolatile %, ASTM-D-2939 55.0-60.0
Viscosity @ 770F, ASTM-D-562 (Kreb's Stormer Unit) 55-65 KU
Softening Point (00F), ASTM-D-36 185-200
Penetration (0.1 mm), ASTM-D-5 10-2
Std. Spec. for Emulsified Asphalt
AASHTO Designation M140-70 meets spec.
ASTM Designation D997-73 meets spec.
Resistance to water, ASTM-D-2939
no blistering, no loss of adhesion, no re-emulsification
Dry Time (hrs.) ASTM-D-2939 less than 1
Shelf Life (yrs.) 1-2
More
+90 (312) 467 85 15
info@asfaltkaplama.com
Follow us!